室内空气和灰尘中全(多)氟烷基化合物的研究进展

全(多)氟烷基化合物(per(poly)fluoroalkyl substances,PFASs)在环境各个介质及人体样品中广泛被检出,近年,在室内空气和灰尘中也普遍发现PFASs.研究表明,室内空气中PFASs的含量普遍高于室外空气,室内空气和灰尘中的PFASs可能是室外空气的污染来源及人体暴露源,因此室内环境中PFASs成为环境领域的又一个研究热点.但目前为止,我国还没有开展室内空气中PFASs的相关研究,室内灰尘中PFASs的研究也相对较少.本文就室内空气和灰尘中PFASs的采样与分析方法、污染现状、来源分析及人体暴露等4个方面进行了综合阐述,以期为我国室内环境中PFASs的研究提供参考.     

2013年苏州春季一次重污染天气的过程分析

研究了2013年3月在江苏范围内的一次重污染天气过程，重点分析苏州在此次污染过程中大气污染的变化特征。污染过程中，苏州市颗粒物浓度上升较为明显， PM10的小时质量浓度最高达548μg／m3， PM2．5质量浓度也达到197μg／m3，污染持续时间为2 d，3月8—9日当地空气质量均达到中度污染水平。根据后向轨迹模型、颗粒物离子浓度的分析，此次污染是由外来浮尘及苏州本地污染物排放所造成的区域霾污染影响所致。根据监测结果与实际污染特征，针对性地提出了对策和措施。     

Dust Storms are an Indication of an Unhealthy Environment in East Asia

Dust storms frequently occur in Mongolia and in northern China. Each year there are 30 to 120 dusty days in source regions of Mongolia and 14–20 dusty days on the Korean Peninsula. Intense sand storms and associated dust falls produce environmental impacts in East Asia. This paper discusses the environmental degradation in Mongolia and the social, economic and atmospheric impacts of dust storms in the sink area. The impact of dust storms on environmental compartments as well as their direct and indirect consequences to basic resources like water and energy demand and supply is explained. Governments are encouraged to take appropriate action in specified regions. For monitoring dust storms there is a need for international cooperation to combat growing environmental and human security concerns.     

Monitoring Biofilm Thickness Using A Non-Destructive, On-Line, Electrical Capacitance Technique

Abstact The present study was designed to evaluate indirect, non-invasive, on-line measurement of biofilm thickness using an electrical capacitance technique. Several assays were carried out and the results showed that, at a frequency of 1 kHz, electrical capacitance could be used to measure biofilm thickness indirectly (with a correlation coefficient of 0.9495). The reproducibility revealed by the assays was also highly satisfactory.However, in contrast to what was expected, there was an inverse relationship between electrical capacitance and biofilm thickness, i.e. electrical capacitance diminished with the increase in the biofilm thickness.The tests were also carried out at different frequencies (1 kHz, 10 kHz and 100 kHz)     

冲击水浴喷雾式除尘器的应用

介绍了冲击水浴喷雾式除尘器在柳钢焦化厂的应用试验情况，制作安装，调试运行后检测鉴定表明，冲击水浴喷雾式除尘器应用在冶金焦末粉尘上，不但操作简单，维护方便，除尘效率高，效果好，而且成本低廉，只有电除尘器或布袋除尘器的20%左右。     

Influence of floc dynamic protection layer on alleviating ultrafiltration membrane fouling induced by humic substances

Cake layer formation is inevitable over time for ultrafiltration (UF) membrane-based drinking water treatment. Although the cake layer is always considered to cause membrane fouling, it can also act as a “dynamic protection layer”, as it further adsorbs pollutants and dramatically reduces their chance of getting to the membrane surface. Here, the UF membrane fouling performance was investigated with pre-deposited loose flocs in the presence of humic acid (HA). The results showed that the floc dynamic protection layer played an important role in removing HA. The higher the solution pH, the more negative the floc charge, resulting in lower HA removal efficiency due to the electrostatic repulsion and large pore size of the floc layer. With decreasing solution pH, a positively charged floc dynamic protection layer was formed, and more HA molecules were adsorbed. The potential reasons were ascribed to the smaller floc size, greater positive charge, and higher roughness of the floc layer. However, similar membrane fouling performance was also observed for the negative and positive floc dynamic protection layers due to their strong looseness characteristics. In addition, the molecular weight (MW) distribution of HA also played an important role in UF membrane fouling behavior. For the small MW HA molecules, the chance of forming a loose cake layer was high with a negatively charged floc dynamic protection layer, while for the large MW HA molecules it was high with a positively charged floc dynamic protection layer. As a result, slight UF membrane fouling was induced.     

Reactive uptake of NO2 on volcanic particles: A possible source of HONO in the atmosphere

The heterogeneous degradation of nitrogen dioxide (NO₂) on five samples of natural Icelandic volcanic particles has been investigated. Laboratory experiments were carried out under simulated atmospheric conditions using a coated wall flow tube (CWFT). The CWFT reactor was coupled to a blue light nitrogen oxides analyzer (NO_x analyzer), and a long path absorption photometer (LOPAP) to monitor in real time the concentrations of NO₂, NO and HONO, respectively. Under dark and ambient relative humidity conditions, the steady state uptake coefficients of NO₂ varied significantly between the volcanic samples probably due to differences in magma composition and morphological variation related with the density of surface OH groups. The irradiation of the surface with simulated sunlight enhanced the uptake coefficients by a factor of three indicating that photo-induced processes on the surface of the dust occur. Furthermore, the product yields of NO and HONO were determined under both dark and simulated sunlight conditions. The relative humidity was found to influence the distribution of gaseous products, promoting the formation of gaseous HONO. A detailed reaction mechanism is proposed that supports our experimental observations. Regarding the atmospheric implications, our results suggest that the NO₂ degradation on volcanic particles and the corresponding formation of HONO is expected to be significant during volcanic dust storms or after a volcanic eruption.     

Coupling mechanism of activated carbon mixed with dust for flue gas desulfurization and denitrification

To clarify the effect of coking dust, sintering dust and fly ash on the activity of activated carbon for various industrial flue gas desulfurization and denitrification, the coupling mechanism of the mixed activated carbon and dust was investigated to provide theoretical reference for the stable operation. The results show that coking dust had 34% desulfurization efficiency and 10% denitrification efficiency; correspondingly, sintering dust and fly ash had no obvious desulfurization and denitrification activities. For the mixture of activated carbon and dust, the coking dust reduced the desulfurization and denitrification efficiencies by blocking the pores of activated carbon, and its inhibiting effect on activated carbon was larger than its own desulfurization and denitrification activity. The sintering dust also reduced the desulfurization efficiency on the activated carbon while enhancing the denitrification efficiency. Fly ash blocked the pores of activated carbon and reduced its reaction activity. The reaction activity of coking dust mainly came from the surface functional groups, similar to that of activated carbon. The reaction activity of sintering dust mainly came from the oxidative property of Fe₂O₃, which oxidized NO to NO₂ and promoted the fast selectively catalytic reduction (SCR) of NO to form N₂. Sintering dust was activated by the joint action of activated carbon, and both had a coupling function. Sintering dust enhanced the adsorption and oxidation of NO, and activated carbon further promoted the reduction of NO_x by NH₃; thus, the denitrification efficiency increased by 5%-7% on the activated carbon.     

海绵城市地块汇水区颗粒污染物的传输

目前我国海绵工程建设多集中在地块汇水区单元内开展,通过多个低影响开发(LID)设施协同完成地表径流水质水量的调控,但基于地块汇水区尺度下城市面源污染的产生和控制效果鲜有报道.本研究比较分析了不同硬化率地块汇水单元内的面源颗粒污染物晴天累积、降雨冲刷、地表径流及径流输出负荷状况.结果表明,地块汇水单元内硬质路面是面源颗粒污染物贡献的最主要的下垫面类型,中硬化率(61.1%)地块和高硬化率(73.6%)地块路面街尘累积量分别约占汇水区单元的88.4%(2.22～12.51 g·m~(-2))和90.1%(4.99～33.43 g·m~(-2)),对径流SS的输出贡献比率分别约为91.7%(0.97～7.34 g·m~(-2))和90.5%(0.92～18.77 g·m~(-2)),降雨径流SS污染负荷占比分别约为95.2%和83.1%,经LID设施处理后输出径流污染负荷约为地表径流的24.0%和40.2%.硬质路面的街尘晴天累积及降雨冲刷以150μm为主,地表径流及输出径流则以50μm粒径段为主,同时地块不透水比例的增加,细粒径(105μm)颗粒物的累积及冲刷分布增大(24.4%和106.4%),而粒径50μm的颗粒物在路面径流中的分布减小(12.4%).屋面的街尘累积、冲刷及降雨径流的粒径分布状况与硬质路面大致相似,但中硬化率地块(1 000μm)和高硬化率地块(250～450μm、45μm)在3个粒径段范围的颗粒物累积和冲刷相较于路面街尘粒径分布明显增加(1 000μm:58.1%和108.5%; 250～450μm:72.9%和41.8%;45μm:59.2%和64.8%).以上结果揭示了颗粒污染物在地块汇水区尺度下的污染全过程(累积-冲刷-输出)分布及LID设施对地块整体SS污染负荷的控制效果,可为地块汇水单元内LID设施工程绩效的科学评估提供重要参考.     

成都市施工扬尘排放特征研究

采用DustTRAK TM气溶胶（粉尘）监测仪对成都市112个不同类别的房建、市政工地施工扬尘进行测试,研究了不同类别施工扬尘的排放特征,分析了下风向扬尘浓度的变化趋势,并采用CALPUFF对成都市新都区某建筑工地的排放进行了模拟.结果表明：（1）成都市施工扬尘排放浓度约为0.13~2.91mg/m³,其中房建类施工平均浓度约为0.94mg/m³,高于市政施工;大型工地扬尘平均浓度约为0.61mg/m³,低于中型和小型工地;土方施工阶段平均浓度约为1.21mg/m³,远高于地基建设、主体建设、装饰阶段.（2）成都市施工扬尘呈现出高低浓度交替的周期性变化,其中房建工程土方施工阶段的高低浓度差值可达到0.6mg/m³以上.（3）施工扬尘在场界外下风向5~15m范围内会出现浓度增加的趋势,随后逐渐下降,在50m附近逐渐趋于稳定,稳定浓度介于0.1~0.2mg/m³.（4）CALPUFF模型能较好地从宏观角度来模拟成都地区施工扬尘的扩散趋势,但难以捕捉施工扬尘在下风向近距离的扩散特征.